Outdoor Furniture Covers: How to Protect Your Patio Furniture This Winter
A good cover is the simplest way to help outdoor furniture last. It keeps off leaves, pollen, bird droppings, rain and snow, and it saves you a long spring cleanup. But a cover that is the wrong fabric or the wrong fit can do more harm than good, trapping moisture against the frame or blowing off in the first storm. Here is how to choose the right one and use it well. For the full end-of-season routine, material by material, see how to winterize patio furniture.
Cover it or store it?
Most quality outdoor frames are built to stay outside, including aluminum, marine grade polymer, wrought iron and Lloyd Loom wicker over aluminum. If you don't have a garage or shed with room to spare, a well-fitted cover is usually the right answer. Storing indoors is the gentlest option when you do have the space.
- Frames: cover them outdoors, or store them somewhere dry. Either way, clean and dry them first.
- Cushions: bring them inside when you can. If they stay out, keep them under a breathable cover and never seal them in plastic.
- Tables: store right side up. Telescope's warranty says its tables must not be stored upside down.
- Hollow frames: in cold climates, drain any water first. Telescope notes that freeze damage is not covered under its warranty.
Breathable vs. waterproof: what to look for
The most common mistake is a plastic tarp or a cheap vinyl cover. Plastic doesn't breathe, so moisture from the air, the ground and the furniture itself condenses underneath and stays there. That is how mildew starts. A quality cover is made from a woven, solution-dyed fabric that sheds rain but still lets moisture escape.
Our custom covers come in three fabrics, each matched to a climate:
- Breathable for dry, sunny climates. It repels water and lets air and moisture out, and the sun dries it completely during the day.
- Hybrid for mixed climates: a waterproof top keeps the rain off while breathable sides let air flow, where the sun doesn't fully dry a cover.
- Waterproof for wet climates and heavy rain, with minimal airflow.
Fit matters as much as fabric. Loose fabric catches the wind, flaps and collects water. Look for a cover sized to your piece, with a way to hold it down at the base: a shock cord or elastic hem, a drawstring, buckles and straps, or hidden weights. On flat surfaces such as dining and coffee tables, a small riser under the cover keeps water from pooling on top.

How to cover furniture the right way
- Clean first. Dirt and pollen left under a cover all winter are harder to remove in spring.
- Let everything dry completely before the cover goes on. Covering wet furniture traps the water you are trying to keep out.
- Store cushions separately, indoors or in a breathable storage bag. A frame cover is not a cushion bag.
- Keep pieces off low spots. OW Lee advises never leaving furniture standing in water, so move it away from where snowmelt collects.
- Fasten every strap and cord so the cover can't lift in the wind.
- Check after storms. Brushing off heavy snow, leaves and standing water keeps the fabric from sagging and stretching.
Brand-made covers: the best fit
When the maker of your furniture also makes the cover, it is patterned for that exact frame. Two of our core brands do.
Telescope Casual makes Weather Max covers sized for its own seating. They use a breathable 8 oz fabric with UV and water protection (Telescope rates it 98% waterproof), an adjustable shock cord around the base, and a pair of tension straps and buckles on the back to hold the lower corners down in high winds. Sectional covers zip together between pieces for a clean fit. Telescope notes that its covers are designed to fit various pieces in the line, so fit will vary. Its warranty also says covers not made by Telescope could damage the furniture's finish, and that damage isn't covered, which makes Telescope's own covers the safest choice for Telescope furniture. We carry them for lounge chairs, loveseats, sofas and Leeward and Belle Isle sectional sections; they ship in about 3 to 5 weeks.

OW Lee makes special fit protective covers for Monterra: the lounge chair, love seat, sofa, chaise and crescent love seat, the Urban Scale lounge chair, love seat and sofa, and the 2, 3 and 4-piece sectionals. They are gray Koveroos WeatherMax with a one-way breathable fabric, a cinch attachment at the base and a 5 year no fade warranty. These covers aren't listed on our site. Email us, or call or text (949) 782-7338, with your collection and pieces, and we'll get the right covers sent your way. New to the collection? Start with our OW Lee Monterra guide.

Fire tables and fire pits: use two covers
A fire table needs a burner cover and a table cover. Turn the gas off and let the burner cool completely first.
- Burner cover: a solid lid over the burner area. Homecrest makes smooth aluminum burner covers that turn the fire table into a usable table surface when the fire is off, and OW Lee makes flat burner covers in round, square and rectangular sizes for its fire pits.
- Table cover: a fabric cover over the whole table. Homecrest's are ripstop polyester, sized for its 42 and 54 inch round, 42 inch square, and 32 x 52 and 36 x 60 inch rectangular fire tables.
If your fire table runs on propane, disconnect the tank and store it outdoors, upright and ventilated. The winterizing guide has the full fire table checklist, and our fire table buying guide covers sizes and fuels.
A cover protects the season you just had. A fire table is how you keep using the patio through the cool months: a 60,000 BTU flame at the center of a lounge group turns a cold evening into one you spend outside. The OW Lee Elba 42 inch round and 30 x 50 inch chat heights are on Quick Ship in set color combinations and ship in 5 to 10 business days. Homecrest fire tables hide a 20 lb propane tank in the base, and Woodard adds sculpted fire tables like the Thatch. Browse every style on our fire tables page.
Custom patio furniture covers for any brand or shape
Not every piece has a cover made for it, and older or unusual pieces rarely do. Our custom made furniture covers are cut and sewn to your exact pieces, from sectionals and dining sets to daybeds and grills, including furniture you didn't buy from us. The fabric is premium solution-dyed fabric from Trivantage, the North Carolina company behind Sunbrella, and cover fabrics carry a 3-year warranty.
- Tell us about your furniture: the pieces, photos and measurements if you have them. If you bought it from us, we often have the dimensions already.
- We recommend a fabric for your climate, mail free swatches and send a tailored quote, usually within 24 hours.
- Your covers are made to order, typically in 5 to 6 weeks from approval, and arrive ready to fit.
Because they are made to order, plan ahead: order in early fall if you want covers on before the first hard freeze.

Covers we carry
Frequently asked questions
Are waterproof patio furniture covers better than breathable ones?
Can I leave cushions on the furniture under a cover?
Does aluminum furniture need a cover if it can't rust?
How long do custom furniture covers take?
Does OW Lee make covers for my furniture?
Custom furniture coversTelescope Casual coversAsk us about covers









