How Much Does a Patio Heater Cost to Run?
Patio heaters are not mysterious to budget for. Every heater has a rated output, every utility bill has a price, and the hourly cost is one line of arithmetic. Below we show the formula for electric, propane and natural gas heaters, work it through for the Bromic heaters we sell, and cover the settings that bring the number down. Our rates are round assumptions for illustration, so plug in the prices from your own bills for a real figure.
The short answer
At an assumed 17 cents per kilowatt-hour, most Bromic electric heaters cost between $0.34 and $1.02 an hour at full power. Gas heaters run about $0.36 to $0.65 an hour on natural gas at $1.50 a therm, or $0.91 to $1.64 an hour on propane at $3.50 a gallon. Dimming an electric heater lowers the cost further.
Electric heaters: kilowatts x hours x your rate
An electric heater's wattage is its draw at full power. Divide by 1,000 to get kilowatts, multiply by the hours you run it, then by your electricity rate in dollars per kilowatt-hour (kWh), which is printed on your bill.
Example: a Tungsten Electric 4000W is 4 kW. Run it for three hours and it uses 12 kWh. At an assumed 17 cents per kWh, that evening costs $2.04, or about $0.68 an hour. If your utility charges 34 cents, double it; if it has cheaper evening rates, use those.
Gas heaters: BTU divided by the fuel's energy, times the price
A gas heater is rated in BTU per hour at full output. Propane holds about 91,500 BTU per gallon, and natural gas is billed in therms of 100,000 BTU. So divide the heater's BTU by 91,500 and multiply by your price per gallon, or divide by 100,000 and multiply by your price per therm.
Example: the Tungsten Smart-Heat 5-burner gas heater is rated at 43,000 BTU. On propane it burns about 0.47 gallons an hour, which is $1.64 at an assumed $3.50 a gallon. On natural gas it uses 0.43 therms an hour, or $0.65 at an assumed $1.50 a therm.
Propane by the tank: a standard 20 lb tank holds about 4.7 gallons, roughly 430,000 BTU. The Tungsten Portable, rated at 43,000 BTU, gets about 10 hours of full output from one tank.
What Bromic heaters cost per hour
Electric figures assume 17 cents per kWh; the last column shows the same heater dimmed to half power, which draws roughly half the energy. Heat areas are Bromic's published figures.
| Electric heater | Power | Heat area | Per hour, full | Per hour, 50% |
|---|---|---|---|---|
| Platinum Electric 2300W | 2.3 kW | 65 sq ft | $0.39 | $0.20 |
| Platinum Electric 3400W | 3.4 kW | 108 sq ft | $0.58 | $0.29 |
| Platinum Electric 4500W | 4.5 kW | 143 sq ft | $0.77 | $0.38 |
| Tungsten Electric 2000W | 2 kW | 65 sq ft | $0.34 | $0.17 |
| Tungsten Electric 4000W | 4 kW | 130 sq ft | $0.68 | $0.34 |
| Tungsten Electric 6000W | 6 kW | 160 sq ft | $1.02 | $0.51 |
| Eclipse Electric 2900W | 2.9 kW | 121 sq ft | $0.49 | $0.25 |
Gas figures assume $3.50 per gallon of propane and $1.50 per therm of natural gas, at full output.
| Gas heater | Output | Heat area | Propane per hour | Natural gas per hour |
|---|---|---|---|---|
| Platinum Gas 3-burner | 23,700 BTU | 160 sq ft | $0.91 | $0.36 |
| Tungsten Gas 3-burner | 26,000 BTU | 160 sq ft | $0.99 | $0.39 |
| Platinum Gas 5-burner | 39,800 BTU | 215 sq ft | $1.52 | $0.60 |
| Tungsten Gas 5-burner | 43,000 BTU | 215 sq ft | $1.64 | $0.65 |
| Tungsten Portable (propane) | 43,000 BTU | 215 sq ft | $1.64 | - |
Compare heat area as well as the hourly figure. A 43,000 BTU gas heater covers about 215 square feet, more than any single electric model, so for a large open patio the cost of warming each square foot can be closer than the hourly numbers suggest.

Five ways to spend less
- Dim it. An Affinity Dimmer sets Bromic electric heaters anywhere from 0 to 100 percent. On a mild evening, half power is often plenty and costs roughly half as much. Gas heaters are on and off only.
- Zone it. Controllers with two channels can switch two groups of heaters separately, so you heat only the half of the patio you are using. One Affinity channel runs up to 6,000W of heaters.
- Schedule it. Affinity controls work with the Bromic Heating app, so heaters come on shortly before you go outside instead of running all evening.
- Size it right. Match heaters to the seated area rather than the whole yard. Two smaller heaters on opposite sides often feel warmer than one large heater on one side. Our guide to how many patio heaters you need shows how.
- Block the wind. Radiant heat holds up better in a breeze than heat that warms the air, but a screen or wall on the windward side keeps more of it with you.

Running cost is only part of the choice
Natural gas is usually the cheapest fuel per hour, but the heater you choose also depends on your space. Electric heaters need a 220 to 240V circuit and only a few inches of ceiling clearance, and they can be dimmed, which makes them the usual pick for covered patios. Gas heaters need a gas line or tank and more clearance overhead, and they suit large, open areas. Installation costs vary from home to home, so ask your electrician or gas fitter for a quote. Our electric vs gas guide compares the two side by side.
Heaters and controls in this guide
Frequently asked questions
Is an electric patio heater expensive to run?
How long does a 20 lb propane tank last in a patio heater?
Is natural gas or propane cheaper for a patio heater?
Does a dimmer save money on an electric patio heater?
Is a patio heater cheaper to run than a fire table?
Get a heating plan
Send us your patio size and your utility rates, and we will suggest heaters and controls that keep the bill sensible. Every Bromic heater ships free, and real people answer at (949) 782-7338.





